Welcome to Cables on Sale!

Monoprice Cat6 Ethernet Bulk Cable Solid 550Mhz UTP, CMP, Plenum, Pure Bare Copper Wire, 23AWG, No Logo, 1000ft, WhiteWhite substitution for FT1 FT4 FT6 SALE PRICE NO EXCHANGE NO RETURN OTHER THAN FOR WARRANTY

Be the first to review this product

Availability: In stock

Only 2 left

Regular Price: $440.42

Special Price $243.99

Monoprice Cat6 Ethernet Bulk Cable Solid 550Mhz UTP, CMP, Plenum, Pure Bare Copper Wire, 23AWG, No Logo, 1000ft, WhiteWhite substitution for FT1 FT4 FT6 SALE PRICE NO EXCHANGE NO RETURN OTHER THAN FOR WARRANTY is available for purchase in increments of 1
OR

Quick Overview

Monoprice - 1000FT Cat 6 Bulk Bare Copper Ethernet Network Cable UTP, Solid, Plenum Jacket (CMP), 550MHz, 23AWG - White

Monoprice - 1000FT Cat 6 Bulk Bare Copper Ethernet Network Cable UTP, Solid, Plenum Jacket (CMP), 550MHz, 23AWG - White

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Monoprice - 1000FT Cat 6 Bulk Bare Copper Ethernet Network Cable UTP, Solid, Plenum Jacket (CMP), 550MHz, 23AWG - White
  • Monoprice - 1000FT Cat 6 Bulk Bare Copper Ethernet Network Cable UTP, Solid, Plenum Jacket (CMP), 550MHz, 23AWG - White

Details

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice!

Features:

  • Unshielded Twisted Pair (UTP) Category 6 Ethernet cable
  • 23AWG solid, pure bare copper conductors
  • CMP (Plenum) fire safety rating
  • 550MHz bandwidth
  • 1000 foot roll
  • TAA compliant

Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables.

 
CMP — Cable meeting CSA FT6 or NFPA 262 (UL 910)

Cable Substitution Hierarchy as per C22.2 #214 — Communication Cables

The following cable substitution may be used:

A. Communication cables marked MPP, CMP, MPR, CMR, MPG, CMG, MP, CM, CMX, CMH, FT6, and FT4 have been found to meet the standard criteria for FT1.

B. Communication cables marked MPP, CMP, MPR, CMR, MPG, CMG, and FT6 have been found to meet the standard criteria for FT4.

C. Communication cables marked MPP and CMP have been found to meet the standard criteria for FT6.

 

Knowledge Base:

Question: What's the difference between Cat 5, Cat 5e and Cat 6? Can I use one in place of another?

Answer: The difference is in the bandwidth ratings. Cat 5e has a higher bandwidth than Cat 5. Cat 6 has a higher rating than Cat 5e.

They all use RJ45 connectors and are usually interchangeable depending on the bandwidth requirements of your devices.

Question: What's the difference between UTP and STP? Are these cables shielded?

Answer: UTP stands for Unshielded Twisted Pairs. STP stands for Shielded Twisted Pairs.

The Ethernet standard uses data packet transmission and error correction. Unlike streaming data transmission, this standard simply buffers and repeats until it has a complete instruction set which compensates data transmission errors.

Since UTP was cheaper in the beginning, it generally became the standard. If you are using the cables for Ethernet connections, either should work. If you are using for a stream data system like video transmission, the shielded should be used.

Question: What's the difference between "Solid" and "Stranded"?

Answer: "Solid" vs. "Stranded" refers to the structure of the individual conduits in the cable. They can be a single solid wire or several thinner stranded wires. It's generally a matter of personal preference which ones you use. Solids are easier to crimp connectors onto.

Question: What are the difference between the various in-wall ratings? (CMG, CMR, CMP)

Answer: In-wall ratings have to do with the burn characteristics of cabling and have no direct effect on the functional performance of the cables.

CMG is for general in-wall use. It is equivalent to CL2 & CL3. It is for general commercial and residential in-wall installation applications.

CMR is riser rated cable. These are suitable for situation where cable is passed from one floor of a structure to another.

CMP is for Plenum and is the highest in-wall rating. Plenum cables are specifically designed to go into the Plenum areas of commercial building where air circulation systems are. Plenum cables are formulated so they do not produce toxic gases as they burn.

While it is okay to use a higher rated cable in lower level applications, you should not do it the other way around.

Question: This cable is listed as being "bare copper", does that mean it has no cable jacket or insulation?

Answer: The "bare copper" refers to the construction of the conductors, as specified in the following reference:

Section 5.3 of TIA-568-C.2 requires compliance with ANSI/ICEA SS-90-661-2006 and ANSI/ICEA S-102-732, which both include the following: "Solid conductors shall consist of commercially pure, annealed, bare copper ..."

http://www.cablinginstall.com/index/display/article-display/4838983421/articles/cabling-installation-maintenance/news/network-cable/cat6/2011/3/CCCA-CDA-warn-against-copper-clad-aluminum-cables.html

The problem is that some manufacturer's cut costs by using Copper Clad Aluminum wire for their conductors. The aluminum has a higher resistance, which causes more heat and can thereby present a fire hazard. "Bare copper" is the term used in the National Electrical Code, Underwriters Laboratories, and the Communications Cable and Connectivity Association (CCCA). Our use of the term is intended to communicate our total compliance with their standards for Ethernet cable construction.

Additional Information

SKU 11438 - G5-3
Length (ft) 1000
Color White
Gauge 23AWG
Type of Boot No
Brand Monoprice

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.