Monoprice - 6ft 28AWG High Speed HDMI Cable w Ferrite Cores - Black
6ft 28AWG High Speed HDMI® Cable w/Ferrite Cores - Black
A High Speed HDMI® Cable from Monoprice is the only way to ensure that you have the ability to pass ALL signals authorized in the latest HDMI® feature specification.
Ferrite Cores are small magnetic blocks wrapped around the end of a cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them as very low-level heat. This is the simplest and cheapest form of electronic noise reduction and is most effective on small gauge cabling, which is inherently more susceptible to electronic noise interference than thicker cables.
This cable supports the following HDMI® features:
• 1080p Resolution - The High Speed HDMI® Cable has sufficient bandwidth to transfer 1080p video signals between 1080p rated source and sink (display) devices.
• Audio Return Channel - Normally, your HDMI® cable carries audio information along with the video from a source device (e.g. blu-ray player) to the sink device (display/television). Often times this goes through an AV receiver to drive a home theater audio system. The Audio Return Channel is primarily used to send the audio signal generated by the television when its internal tuner is used, back to the AV receiver, so that you can use your home theater audio system when watching television signals.
• 3D - 3D is the latest rage for both home theater and gaming. A High Speed HDMI® Cable is capable of handling the high bandwidth requirements of 3D signals.
• 4K - The 4K resolution is 3840 x 2160 pixels @ 24 Hz, which is four times that of a 1080p display and the same resolution used by state-of-the-art Digital Cinema systems. A High Speed HDMI® Cable is capable of handling the high bandwidth required for 4K support.
• Deep Color - The Deep Color feature provides a minimum of 8-bits per color element (24-bits total), providing for a total of over 16 million color variations. Other versions of Deep Color allow for up to 16-bits per element, for a total of 48-bits and over 281 trillion color variations, which really makes your video images come to life!
x.v.Color™ - x.v.Color™ is a promotion name given to the products that have the capability to realize a wide color space based on the xvYCC specifications and is a trademark of Sony Corporation. Currently, only AVCHD and Playstation 3 devices support x.v.Color™.
High Definition Audio - HDMI® supports a full range of high definition audio types, including SA-CD, DVD-Audio, DTS-HD Master Audio™, and Dolby TrueHD™.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
x.v.Color™ is a trademark of Sony Corporation.
AVCHD and AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation.
PlayStation and PlayStation 3 are trademarks or registered trademarks of Sony Corporation.
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
|Features and Specifications|
|Connector Type||HDMI® male to HDMI® male|
|HDMI® Connector Head Size||20 x 11 x 37 mm|
|HDMI® Connector Diameter||8 mm|
|Number of Conductors||19|
|Ferrite Cores||Yes, 1 on each end (1 1/2" long by 7/8" diameter each)|
|Supported Resolutions||480i to 4k|
|Bandwidth||up to 340 MHz per channel (1.02 GHz total)|
|Data Throughput||up to 3.4 Gbps per channel (10.2 Gbps total)|
|Deep Color||10-bit, 12-bit, and 3x16-bit (48-bit RGB or YCbCr), X.V.Color™|
|Supports DVD Audio||Yes|
|Supports Dolby TrueHD™ & DTS-HD Master Audio™||Yes|
|Category 2 Certified||Yes|
|UL File #||E119932|
|UL Style #||20276|
|Temperature Rating||80° C|
Question: What is AWG?
Answer: AWG stands for "American Wire Gauge." It is the thickness of the wire inside the cable. The lower number AWG denotes thicker wiring and thicker overall cable. Thicker cables are recommended for longer cable runs because they offer less resistance along the signal path.
Question: What does the gold plating refer to?
Answer: Gold plating refers to the connectors. Gold plating provides resistance against corrosion that would otherwise impede signal transfer and could damage connections on equipment.
Question: How do I know if I need male to male cables or male to female?
Answer: As a rule, consumer electronics devices ALWAYS have female ports on them. (a protruding male connector would break off too easily) So, for connecting two devices together, you need a male to male cable.
Male to female cables are used to extend existing cables.
Question: Will these cables work with my new 120hz display?
Answer: Yes, absolutely.
|SKU||3992 - S1-79|