You have no items in your shopping cart.

Sale

Monoprice HDBaseT 4x2 HDMI Matrix Switch and Receiver

Be the first to review this product

Quick Overview

Monoprice - HDBaseT™ 4x2 HDMI® Matrix Switch and Receiver

Availability: In stock

Available inventory: 1

Only 1 left

Regular Price: $551.87

Special Price: $450.99

Monoprice HDBaseT 4x2 HDMI Matrix Switch and Receiver is available for purchase in increments of 1
custom block

HDBaseT™ 4x2 HDMI® Matrix Switch and Receiver

Monoprice is a proud member of the HDBaseT Alliance

Distribute up to four HDMI® audio/video source signals to any of two locations using this HDBaseT™ 4x2 HDMI Matrix Switch from Monoprice!

This 4x2 Matrix Switch features four HDMI video inputs and two outputs. One of the outputs is a standard HDMI port for a local connection, while the other is an HDBaseT RJ45 jack for an extended connection. The HDBaseT technology allows for a full bandwidth 10.2Gbps data throughput to distances up to 328 feet over a single Cat5e or Cat6 cable.

The full 10.2Gbps bandwidth support means that this matrix supports all High Speed HDMI functions, including all HDMI 3D video modes, the extended 4K cinema resolution, 32-bit Deep Color, and high-definition compressed lossless audio, such as DTS-HD Master Audio™ and Dolby TrueHD™. The matrix features a built-in, bidirectional infrared (IR) signal extender, which allows you to remotely control devices at the source or destination end of the connection. Additionally, an IR Adapter allows you to use the IR repeater function with the HDMI cable connection.

The HDBaseT extender is capable of transmitting a full-duplex 100Mbps local area network connection alongside the HDMI and IR signals. The matrix has two RJ45 LAN jacks on the back panel, while the HDBaseT Receiver has another two RJ45 LAN jacks. As long as one of the four jacks is connected to the network, the other three will propagate the network connection. This allows you to wire another room for HDMI video, IR remote control repeating, and full internet access, using only a single Cat6 cable!

Note: While the extender will function using unshielded Cat5e cabling, we recommend the use of shielded Cat6 cabling for greater reliability over longer distances. Also note that any cable run through the walls must be rated for in-wall installations.

Features:

  • 4x2 HDMI Matrix with 4x HDMI inputs and 2x HDMI outputs
  • Full Matrix can simultaneously distribute any input to any or all outputs
  • Extends HDMI signals up to 328 feet (100 meters) using a single Cat6 cable
  • Extends 100Base-TX network connectivity along with the HDMI video
  • Can be daisy chained up to six units deep
  • Built-in bidirectional IR repeater
  • Supports High Speed HDMI functions, including 3D video

 

This HDBaseT device is fully compatible with these other HDBaseT extender products from Monoprice:

 

Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.

Support Files:

 

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

Specifications:

Specifications
Supported Video High Speed HDMI with HDCP 1.2
Supported Resolutions 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Color Support up to 12-bit/channel Deep Color (36-bit total)
Audio Support LPCM, Dolby AC3, DTS 7.1, DSD
Bandwidth/Data Throughput up to 10.2Gbps
Operating Temperature Range +5 ~ +131°F (-15 ~ +55°C)
Operating Humidity Range 5 ~ 90% RH (no condensation)

 

Included in the Package:

  • 1x 4x2 HDMI Matrix with Cat6 output
  • 1x HDMI Receiver with Cat6 input
  • 1x 12 VDC AC Adapter for the Matrix unit
  • 1x 5 VDC AC Adapters for the Receiver unit
  • 1x IR Receiver
  • 1x IR Transmitter
  • 1x IR Adapter
  • 1x Remote control
  • 1x User's manual

 

This kit comes with a single IR transmitter bulb and a single IR receiver bulb. Additional bulbs can be purchased separately. See PIDs 8059 IR Sender and 8060 IR Receiver .

 

Video:

 

SKU 10226 - S6-18
Length (ft) No
Color No
Gauge No
Type of Boot No
Brand Monoprice

Only registered users can write reviews. Please, log in or register

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

Need Help?