3X1 Pigtail HDMI® Switch
Do you not have enough HDMI® inputs on your TV to handle all your new HD devices? You don't need a new TV and you don't need an expensive or bulky box. Just get this simple HDMI 3x1 Pigtail Switch adapter instead!
Plug this switch into your TV's input. Then plug the cable from each of your HD devices into the switch. That's it! No special setup required, no power needed, no remotes to program. Just plug it in and start playing.
The switch has three inputs and supports full 1080p resolution with HDCP pass-through. It can handle up to 12-bits per channel (36-bit total) Deep Color and digital audio, including DTS-HD Master Audio™ and Dolby TrueHD™. It has a 20" cable and gold-plated HDMI connectors for superior signal quality.
The switch will automatically switch between inputs, depending on which one is on at the time. If both source devices are on, just press the small button on the switch to change the input.
Supports 1080p video resolution
Automatic or physical switching
Supports 250 MHz/2.5 Gbps per channel (7.5 Gbps all channel) bandwidth
Supports 12-bit per channel (36-bit all channel) Deep Color
Supports uncompressed audio such as LPCM
Supports compressed audio such as DTS® Digital, Dolby® Digital, DTS-HD Master Audio™, and Dolby TrueHD™
Gold-plated HDMI connectors
Complies with CE, FCC, and RoHS standards
Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.
Input Signal HDMI®, 5 volts p-p (TTL)
Output Video HDMI®
Input Video Amplifier Bandwidth 2.5 Gbps/250 MHz
Interlaced Resolutions (50 & 60 Hz) 480i, 576i, 1080i
Progressive Resolutions (50 & 60 Hz) 480p, 576p, 720p, 1080p
External Power Supply none
Power Consumption (Max) 5W
Operating Temperature 0° C to +70° C
Operating Humidity 10% to 85% RH (no condensation)
Storage Temperature -10° C to + 80° C
Storage Humidity 5% to 85% RH (no condensation)
Regulatory Approvals FCC, CE, RoHS
Question: The picture from my switch is constantly flickering, even though I have 24AWG or thicker HDMI cables.
Answer: The issue could be caused by a device or cable nearby the setup,or in the setup causing interference. Try rerouting cable paths and distancing devices from sources of interference, such as moving routers and other networking cables away from the switch setup.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.