4x1 HDMI® Switch w/ CEC Engine (Full 1080p HD) w/ 3D support
It seems like everything uses HDMI® these days, from home theater equipment to your Android phone. With so many HDMI devices in use, most televisions quickly run out of available HDMI input ports. You don't want the hassle of plugging and unplugging cables whenever you want to watch or play something different and you don't want the expense of new TV. Just get this 4x1 Enhanced HDMI Switch from Monoprice!
If you're looking for a switch that will allow you to take advantage of the advanced HDMI features your equipment has to offer, then this is the switch for you. This switch features a CEC (consumer electronics control) engine that allows the switch to communicate with your devices, automatically power your TV on when a source device is powered up, and will even switch your TV to the correct input for the connected device. This switch also supports advanced HDMI features, such as full High Speed (1080p) resolution, 3D video, and Deep Color (up to 36-bit). Additionally, it provides full support for advanced digital audio formats, including DTS-HD Master Audio™ and Dolby TrueHD™.
The four input and one output HDMI ports on the back of the unit are gold plated to ensure smooth, corrosion-free connections. It is powered by an included 5 VDC, 2A AC adapter. The remote control allows direct selection of each input by pressing the appropriate numbered button.
Note: Certain devices may not be compatible with the CEC engine and certain functions may not work with your specific equipment. Manufacturers have developed different variations of the CEC protocol (Samsung ANYNET+, Sony Bravia Sync, Sharp Aquos Link, etc.), and equipment from different manufacturers may not be fully compatible with each other.
Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.
Inputs/Outputs: (4) HDMI® inputs - (1) HDMI® output
Gold plated input/output connectors
IR remote control
Supports full HD 1080p resolution
Supports Deep Color 12-bits per channel at 1080p
Digital audio formats supported: DTS-HD Master Audio™, Dolby TrueHD™
HDMI® CEC functions supported: routing change, one touch play, stand by, CEC pass-through
Power supply: 5V DC 1A output - 100v-240v input
In the box:
4x1 HDMI® Switch - HD-411E3
5V DC 1A Power Adapter
Question: The picture from my switch is constantly flickering, even though I have 24AWG or thicker HDMI cables.
Answer: The issue could be caused by a device or cable nearby the setup,or in the setup causing interference. Try rerouting cable paths and distancing devices from sources of interference, such as moving routers and other networking cables away from the switch setup.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.